WIFI/蓝牙智能小车机器人操控平台正式版V1.27发布与开通双向数据设置

xxmy

太棒了，直接搞定

咸菜

为什么我连解压都不行啊 ？？

xiaomaliu

很不错的教程，学习了

mihaifireball

Hi,
i am not able to control my robot(DS Robot) with this software. i was able to build id from video tutorials (i dont speak Chinese.. ) and now am able to see the video from the webcam, but none of the control commands are working... what am I doing wrong? i dont think the wifi board is communicating with the 51duino board because none of the blue leds are blinking when sending movement commands. please help!
Thank you!

mihaifireball

I think i found the problem.. if i send the commands manually from USR-TCP232-Test, the robot is working fine. when I tried to monitor the WIFIRobot software, I found that  the only command that it is sending is FF 02 02 05 FF when connecting to WiFi and after that, it is not sending any other commands.. do you have any idea why? the software is expecting a reply from robot, or what?
Thank you!

liuviking

mihaifireball 发表于 2015-9-5 02:07
I think i found the problem.. if i send the commands manually from USR-TCP232-Test, the robot is wor ...

Do you try the PC software？please close your firewall

mihaifireball

Here what i did:

1. Disabled the windows firewall
2. I opened the USR-TCP232-Test software and I started the TCP server on my local IP address(localhost) on port 2001.
3. I started WIFIRobotV1.28 PC software, changed the connection settings to point to my IP address, on port 2001.
4. I chose the WIFI connection from the menu - i get no connection error from the app.

This is what i am receiving in the USR-TCP232-Test window:
¡¾Receive from 10.100.1.1 : 60319¡¿￡o
FF 02 02 05 FFFF 02 01 05 FF

Now if i press any other button, the PC software is not sending any commands.
Also I tried to use another PC software application found on forum (MyWifiCar) and everything seems to work fine.

What could be the problem with WIFIRobotV1.28 PC software?

I am using Windows 10 by the way....

liuviking

mihaifireball 发表于 2015-9-5 19:08
Here what i did:

1. Disabled the windows firewall

just 1 client allow to connect with 2001 port,if the USR-TCP232-TEST Connected ,the PC Client could not connect successful

mihaifireball

I know that.. i am using the USR-TCP232-TEST instead of ser2net of the robot.. to see the commands that the   WIFIRobotV1.28 PC Software is sending... and the only command is FF 02 02 05 FF, why not the others like control commands (forward, left, right...etc.)

liuviking

mihaifireball 发表于 2015-9-5 19:30
I know that.. i am using the USR-TCP232-TEST instead of ser2net of the robot.. to see the commands t ...

press keyborad  W S D A tu send other commands.please give me your E-mail,i send you an English version