|
|
本帖最后由 hanzhistar 于 2012-8-21 19:15 编辑
除了openwrt其他的 什么电信版本呀 dlink版本呀都刷可以刷上。
CFE version 1.0.37-11.3 for BCM96358 (32bit,SP,BE)
Build Date: 涓? 5鏈?28 22:37:40 CST 2008 (root@fc6.ayecom.com)
Copyright (C) 2000-2006 Broadcom Corporation.
一下是刷 openwrt的信息
Auto run second count down: 0
Booting from previous image (0xbe020000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
Decompression OK!
Entry at 0x80010000
Closing network.
Starting program at 0x80010000
Linux version 2.6.32.25 (openwrt@ampere) (gcc version 4.3.3 (GCC) ) #1 Fri Nov 1
9 21:51:29 PST 2010
Detected Broadcom 0x6358 CPU revision a1
CPU frequency is 300 MHz
32MB of RAM installed
registering 40 GPIOs
board_bcm963xx: CFE version: 1.0.37-11.3
board_bcm963xx: unknown bcm963xx board: 96358GW
bootconsole [early0] enabled
CPU revision is: 0002a010 (Broadcom BCM6358)
Kernel panic - not syncing: unable to detect bcm963xx board |
|
/2 
|QQ技术咨询1|QQ技术咨询2|商务合作微信1：xiaorgeek001|商务合作微信2:XiaoRGEEK|诚聘英才|Archiver|手机版|小R科技-WIFI机器人网·机器人创意工作室
( 粤ICP备15000788号-6 )
发表于 2012-8-21 19:09:26
发表于 2012-8-21 21:28:11
