<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>小R科技-WIFI机器人网·机器人创意工作室 - Openwrt技术交流区</title>
    <link>http://www.wifi-robots.com/forum-40-1.html</link>
    <description>Latest 20 threads of Openwrt技术交流区</description>
    <copyright>Copyright(C) 小R科技-WIFI机器人网·机器人创意工作室</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 04 Nov 2026 22:28:56 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.wifi-robots.com/static/image/common/logo_88_31.gif</url>
      <title>小R科技-WIFI机器人网·机器人创意工作室</title>
      <link>http://www.wifi-robots.com/</link>
    </image>
    <item>
      <title>小R高清摄像头设置双路视频功能教程</title>
      <link>http://www.wifi-robots.com/thread-29099-1-1.html</link>
      <description><![CDATA[首先要明确，只有XR-BOT LINK5.0双天线wifi模块可以支持同时传送2路高清摄像头视频，单天线的模块是无法同时推送两路高清视频数据的。5.0模块采购地址：https://item.taobao.com/item.htm?spm=a1z10.5-c-s.w4002-15160605207.17.1d111c28zLcioG&amp;id=44888591498
1、    ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>风华正茂</author>
      <pubDate>Wed, 22 Jan 2020 08:56:26 +0000</pubDate>
    </item>
    <item>
      <title>mt7620刷机没有无线</title>
      <link>http://www.wifi-robots.com/thread-8984-1-1.html</link>
      <description><![CDATA[如题，现象如图片。刷机后，发现没有无线信号，是不是还需要做什么配置？]]></description>
      <category>Openwrt技术交流区</category>
      <author>千里</author>
      <pubDate>Thu, 13 Jul 2017 07:53:20 +0000</pubDate>
    </item>
    <item>
      <title>openwrt没有找到摄像头</title>
      <link>http://www.wifi-robots.com/thread-8979-1-1.html</link>
      <description><![CDATA[root@OpenWrt:/# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID e806:6001  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

我用的是Robot Eyes,上面的情况是不是没有安装驱动？新手不知道怎 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>千里</author>
      <pubDate>Tue, 11 Jul 2017 01:30:21 +0000</pubDate>
    </item>
    <item>
      <title>robot_link5.0变砖怎么救？</title>
      <link>http://www.wifi-robots.com/thread-8970-1-1.html</link>
      <description><![CDATA[robot_link5.0变砖怎么救？还有救么？
串口输出：
U-Boot 1.1.3 (Sep 21 2014 - 09:29:11)

Board: Ralink APSoC DRAM:  64 kB
relocate_code Pointer at: 7ffc8000]]></description>
      <category>Openwrt技术交流区</category>
      <author>千里</author>
      <pubDate>Thu, 29 Jun 2017 05:20:53 +0000</pubDate>
    </item>
    <item>
      <title>第一次编译出现download failed请问怎么解决？</title>
      <link>http://www.wifi-robots.com/thread-8964-1-1.html</link>
      <description><![CDATA[第一次编译，出现如附件的提示信息，请问怎么编译过去。。。]]></description>
      <category>Openwrt技术交流区</category>
      <author>千里</author>
      <pubDate>Thu, 22 Jun 2017 02:50:03 +0000</pubDate>
    </item>
    <item>
      <title>MT7620的openwrt配置菜单中，芯片怎么选择？</title>
      <link>http://www.wifi-robots.com/thread-8963-1-1.html</link>
      <description><![CDATA[如题，我在make menuconfig后芯片的选项里面没有发现mt7620N的这个芯片，请问有没有谁知道？]]></description>
      <category>Openwrt技术交流区</category>
      <author>千里</author>
      <pubDate>Tue, 20 Jun 2017 01:43:22 +0000</pubDate>
    </item>
    <item>
      <title>亲测可用[转]官方17ce老毛子Padavan华硕固件router插件安装方法|集成不占空间k1斐讯k2</title>
      <link>http://www.wifi-robots.com/thread-8922-1-1.html</link>
      <description><![CDATA[亲测可用！17ce终于支持老毛子Padavan固件了！请教了几位大神，感谢大神们的教程和指点，几条命令就搞定了。。。兴奋ing！不会也没事，收益低，挂不挂它无所谓。实在想折腾也可以发短消息给我，很简单的，包会。
走了很多弯路，刷了好几个假教程。。自己百度就明白了。 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>水蓝星空</author>
      <pubDate>Thu, 11 May 2017 01:07:17 +0000</pubDate>
    </item>
    <item>
      <title>wifi模块双向数据测试</title>
      <link>http://www.wifi-robots.com/thread-8903-1-1.html</link>
      <description><![CDATA[wifi模块开通双向数据：http://www.wifi-robots.com/thread-2985-1-1.html



以51板为例测试，其他板子一样 ，我在单片机主函数里直接加入循环发送数据，注意此时就是单片机向wifi上传



电脑连接wifi模块


配置如上，然后点击连接，即可监听和向单片机发 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>风华正茂</author>
      <pubDate>Thu, 20 Apr 2017 06:27:40 +0000</pubDate>
    </item>
    <item>
      <title>wifi 4.0模块更改多路视频传输设置</title>
      <link>http://www.wifi-robots.com/thread-8902-1-1.html</link>
      <description><![CDATA[（摄像头ID更改教程   http://www.wifi-robots.com/thread-8901-1-1.html）

首先打开winscp，没有的可以百度下载或者电击这里http://pan.baidu.com/s/1cF30V8


然后严格按照上图配置，点击登录（注意点击登录前电脑和wifi模块是连通的，即电脑已经连接wifi模块无 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>风华正茂</author>
      <pubDate>Thu, 20 Apr 2017 05:57:49 +0000</pubDate>
    </item>
    <item>
      <title>摄像头双路教程——摄像头ID更改</title>
      <link>http://www.wifi-robots.com/thread-8901-1-1.html</link>
      <description><![CDATA[有同学做双路视频连接发现只显示一路视频,那有可能就是摄像头ID一样造成的，更改方法如下：
首先下载id烧录工具，确保摄像头是在wifi-robots官方商城购买
打开工具包exe文件



这时候可以看到USB Camera
[/backcolor]
前提是摄像头已经插入电脑
[/backcolor] ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>风华正茂</author>
      <pubDate>Thu, 20 Apr 2017 04:47:55 +0000</pubDate>
    </item>
    <item>
      <title>路由器重置</title>
      <link>http://www.wifi-robots.com/thread-8894-1-1.html</link>
      <description><![CDATA[如果把路由器重置了，那么之前的控制端口和视频端口会改变吗，之前的控制端口是2001，视频端口是8083，但是重置后通过网页登录截图如下：]]></description>
      <category>Openwrt技术交流区</category>
      <author>UPC_huang</author>
      <pubDate>Tue, 18 Apr 2017 02:54:59 +0000</pubDate>
    </item>
    <item>
      <title>703N刷openwrt画面卡住的问题</title>
      <link>http://www.wifi-robots.com/thread-8877-1-1.html</link>
      <description><![CDATA[图片能看到，然后过一会就卡住了。谁能教下怎么做。http://www.wifi-robots.com/forum.php?mod=viewthread&amp;tid=739看到这个帖子，按里面的方法做了貌似还是不管用。]]></description>
      <category>Openwrt技术交流区</category>
      <author>xxx韩</author>
      <pubDate>Mon, 27 Mar 2017 12:58:40 +0000</pubDate>
    </item>
    <item>
      <title>51DS小车摄像头</title>
      <link>http://www.wifi-robots.com/thread-8830-1-1.html</link>
      <description><![CDATA[想了解一下51DS小车摄像头的具体参数，如CMOS尺寸等。但是不知道该摄像头的具体型号和厂家，无从下手。朋友手里如果有该摄像头的具体参数信息，或知道该摄像头的具体型号，蛮烦告诉在下一声，万分感谢！！本人邮箱为： 该摄像头的淘宝链接为：https://item.taobao.com/i ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>w272628569</author>
      <pubDate>Tue, 07 Feb 2017 08:53:57 +0000</pubDate>
    </item>
    <item>
      <title>【转载】AR/QCA/MTK Breed，功能强大的多线程 Bootloader</title>
      <link>http://www.wifi-robots.com/thread-8814-1-1.html</link>
      <description><![CDATA[注：专用版能够点亮所有LED

以下是可以支持自定义复位键 GPIO 的特别版

目前仅打算出这几个 SoC 的特别版，其它的依然出专用版和固定复位键的版本

[刷入方式]
跟 U-Boot 相同的刷入方法：

[*]从 PandoraBox U-Boot 中刷入
[*]在固件中使用 mtd 命令刷入 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>982419756</author>
      <pubDate>Sun, 15 Jan 2017 14:04:46 +0000</pubDate>
    </item>
    <item>
      <title>Ubuntu linux虚拟机安装Samba。提示无法访问。您可能没有权限使用网络资源的解决办法</title>
      <link>http://www.wifi-robots.com/thread-8803-1-1.html</link>
      <description><![CDATA[最近编译uboot 要用到linux的文件夹共享功能  ，之前一直是在两个界面来回切换···太麻烦。所以今天想设置samba 来实现文件夹共享，并实现以下功能：
在window 7界面下 
1、使用secureCRT 通过ssh2 访问虚拟机。
2、并通过安装Samba直接通过虚拟机的共享文件夹来烧 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>木棉湾-呆呆</author>
      <pubDate>Sun, 25 Dec 2016 07:14:16 +0000</pubDate>
    </item>
    <item>
      <title>求解运行ser2net缺少libdl.so.0</title>
      <link>http://www.wifi-robots.com/thread-8801-1-1.html</link>
      <description><![CDATA[如图，运行缺少libdl.so.0，这个so库在哪能找到？]]></description>
      <category>Openwrt技术交流区</category>
      <author>lhh煌</author>
      <pubDate>Wed, 21 Dec 2016 12:06:21 +0000</pubDate>
    </item>
    <item>
      <title>求教openwrt下安装ipk包问题</title>
      <link>http://www.wifi-robots.com/thread-8797-1-1.html</link>
      <description><![CDATA[配置如图，可是在安装ipk包时提示兼容错误：* pkg_hash_fetch_best_installation_candidate: Packages for socat found, but incompatible with the architectures configured

我想问问各位大神们这里的配置指的是什么配置，是我刷的u-book版本问题还是固件的配置， ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>lhh煌</author>
      <pubDate>Fri, 16 Dec 2016 02:05:48 +0000</pubDate>
    </item>
    <item>
      <title>如何改变上传视频的大小</title>
      <link>http://www.wifi-robots.com/thread-8769-1-1.html</link>
      <description><![CDATA[产品设定的默认值应该是320*240，但是传输到PC端感觉不清晰（直接插在PC的USB端口清晰），感觉应该是视频大小的问题，有没有大神给建议！另外如何设置上传视频的格式，3Q]]></description>
      <category>Openwrt技术交流区</category>
      <author>w272628569</author>
      <pubDate>Mon, 07 Nov 2016 12:36:53 +0000</pubDate>
    </item>
    <item>
      <title>如何eclipse修改源码，改变图标</title>
      <link>http://www.wifi-robots.com/thread-8766-1-1.html</link>
      <description><![CDATA[上次看了视频，知道软件源码是在eclipse的环境下生成的。现在想更换一下图标，还有里面的进入界面的封面，问过客服，直接修改就可以了。修改之后，重新打包，里面功能都没了，只有前后左右，按一下前就一直往前走，其他的键就动不了。是因为版权，设置了签名的原意，导 ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>艾克</author>
      <pubDate>Sun, 06 Nov 2016 09:36:25 +0000</pubDate>
    </item>
    <item>
      <title>新手請教設定openwrt 去連接wifi設備</title>
      <link>http://www.wifi-robots.com/thread-8747-1-1.html</link>
      <description><![CDATA[dear 各位大神:

我是個新手想請教各位如果透過設定openwrt 去連接我的wifi設備(主要目的是我要讓它連線更新固件)
想請教這兩個設定檔如何設定?或者我還有遺漏的~另外再問 /etc/opkg.conf 各位更新源內容[/backcolor]

/etc/config/wireless
/etc/config/network ...]]></description>
      <category>Openwrt技术交流区</category>
      <author>registertwpcboy</author>
      <pubDate>Thu, 20 Oct 2016 02:48:00 +0000</pubDate>
    </item>
  </channel>
</rss>